DIY OPEN CELL POLYURETHANE SPRAY INSULATION FOAM Description DIY .5 is a open-cell, spray applied polyurethane foam. It is a two component, low density, semi-rigid, water blown, non-structural insulation system. This low density system will provide a high yield of Class 1 tested foam providing better air quality and increased comfort inside the structure. Usage DIY .5is a low density; spray applied polyurethane foam insulation used in walls, floors, ceilings, attics and ducts and as an air barrier building envelope insulation system. Maximum service temperature is 180°F. Physical Properties
340 Board Feet Per Case
Temperature should be above 50 degrees for optimum yield.
Product temperature must be between 80-90 degree's prior to spraying.
Fastkick Applicator Gun not included in package above