2.0 lb Foam 10 Case (1,500 BF) Package DealW/Fastkick Applicator
During application, to obtain heavier build thickness, it is important to apply a heavy one-pass delivery. Do not dispense multi-passes as pinholing will occur. Substrate must be dry whilerelative humidity < 85% Closed Cell foam may be applied from 40°F to 100°F in high humidity climateswith target surfaces clean and moisture free.
R-Factor approx, 6.8 per inch
2 lb Closed CELL FOAM SPECIFICATION:
|DENSITY (PCF)||ASTM D1622||2 lb|
|Fire Rating||ASTM E84||Class 1|
|Thermal Resistance (Rvalue)||ASTM C518||6.8|
|Compressive Strength (psi)||ASTM D1621||25|
|Shear Strength (psi)||ASTM C273||22|
|Shear Modulus||ASTM C273||231|
|Tensile Strength (psi)||ASTM D1623||40|
|Flexual Strength (psi)||ASTM C203||55|
|Flexual Modulus||ASTM C203||522|
|Water Absorption (%vol)||ASTM D2842||<0.5|
|Water Vapor (perm-in)||ASTM E96||<1.0|
|Fungi Resistance||ASTM C 1338||None|
|Closed Cell Content (%)||ASTM D2856||>75|
1 "FastKick" Plural Component dispensing gun
10 cases of DIY 2.0lb Closed Cell density Cell Spray foam.
60 static mixing tubes
Note: Please leave a daytime phone number you can be reached at, on the checkout instructions page.
THIS KIT WILL YIELD 1500 BOARD FEET ( one sq ft by 1 inch thick )
Material temperature must be 80-90 degrees prior to spraying.